SOC-500 base stock by SEPAHAN OIL Co. has become the most widely used base oil in Middle East. It is the workhouse ingredient for formulators and blenders of lubricants for passengers and commercial vehicles, as well as industrials applications. As a result, SEPAHAN OIL Co. is a recognized market leader for group I base stocks in Middle East, North Africa and Asia Pacific.
Paraffin is cut light oil with low Viscosity. Its raw material is off-test of Isomax unit. Paraffin follows the formula of saturated hydrocarbon. It can be used in pharmaceutical, food packaging, cosmetic and other applications, where this high purity is required by legislation or important for the quality of the finished product. Sepahan paraffin has a good water resistance.
Sepahan Coolant is conventional, ethylene glycol based antifreeze for use in automotive and light duty diesel applications. Sep Coolant contains inhibitors that provide maximum protection from freezing -58°c and boil-over +129°c. It offers efficient metal corrosion protection particularly for aluminum. (Its formula protects all metals, including, against damaging rust and corrosion when used as recommended.)
SUPER SPD oils are an advanced technology, semi-synthetic motor oils providing superior performance in modern passenger car engines. The use of very highViscosity indexbase stocks in the formulation ensures excellent Viscosity retention and outstanding engine protection under all modern driving conditions.
Golden SPEEDY engine is high performance engine oil primarily intended for use in gasoline automotive engines of passenger cars, commercial vehicle and farm equipment. It may also be used in diesel engines of commercial vehicles and contractor equipment. It is formulated from high quality mineral base oils and an advanced additive system to provide the superior performance required for modern combustion engines.
PARDA SPD is a conventional multigrade engine oil of good all round performance, formulated with high quality mineral oils plus selected additives, ideally suited to older technology and classic car engines. It is designed to meet manufacturer's requirements for passenger cars and motorcycles running under normal service conditions. The prime recommendation is for all pre-1980 petrol engine vehicles requiring a high quality product but with an older technology additive formulation.
BORNA SPD is manufactured from high quality solvent extracted base oil and contains selective additives meet the API performance level SD/CC. Provides more lubrications equal useful in all weather excellent protection also provides excellent protection from rubbing the more TBN quantity neutralize acidic effects.
SEPAHAN SPD engine oils are blends of highly refined mineral oils with high performance additives. They are recommended for use in a wide range of applications including gasoline and light duty diesel engines found in passenger cars, agriculture, construction and certain hydraulic systems. They are blended to meet API service classification SC/CC and are available in Viscosity rage SAE 30 to 50.
STIR® Oils have supreme performance, fully synthetic diesel engine oils that help to extend engine life while providing long drain capability and fuel economy for modern diesel engines operating in severe applications. Stir oils are recommended for use in a wide range of heavy-duty applications and operating environments found in the on-road transport and off-road mining, construction, and other industries.
Super diesel SPD oil is a high premium diesel engine oils developed for use in modern high speed urbocharged and supercharged diesel engines. It uses carefully selected additives in conjunction with highly refined base oils to deliver longer life and enhanced protection relative to their predecessors. Super diesel SPD oil has been designed for severe duty service in engines and meets the API CH-4 specification for diesel engines.
Diesel SPD Oils are high quality, multi-purpose heavy duty engine lubricants formulated from advanced technology base oils and a balanced additive system. They are specifically engineered for performance in turbo-charged and super-charged engines operating under severe on and off-highway conditions.
Kia SPD Oils combine high performance fully-refined basestocks and the most advanced additive technology to provide outstanding engine protection. They are the most advanced four-stroke motorcycle engine oils. These products provide the highest level of dependable performance required by today's high performance motorcycles.
Sepahan Alborz 10 is formulated from an excellent mineral base stock combined with special additive package for use in a wide range of applications such as hydraulic systems and pumps. With very low pour point, it has good cold starting. The use of additive in formulation ensures good protection against wear, rust and corrosion.
CNG SPD is a premium performance gas engine oil developed to meet the rigorous demands of today’s high output two and four-cycle engines which have been designed to reduce emissions and improve fuel-efficiency. Its detergent and dispersant performance controls the formation of carbon deposits, lacquer and sludge resulting in cleaner engines, longer oil life; and reduced filter costs.
CNG SPD is designed to provide exceptional protection against piston scuffing, scoring and ring and liner wear.
Generator SPD is a high Viscosity, heavy-duty, mono-grade diesel engine oils formulated with an optimized combination of base oils and a balanced additive system. Its high performance heavy duty engine lubricants designed for use in all diesel engines. Generator SPD provides outstanding lubrication for road transportation and construction industry power units, operating on or off the highway under the toughest conditions.
Tractor SPD is high performance, multi-functional lubricants for most farm equipment applications. These STOU lubricants provide good performance in diesel and gasoline engines, transmissions, hydraulics, final drives, and oil-immersed brakes operating in agricultural service. Tractor SPD multigrades are recommended for use in a wide range of heavy-duty applications and operating environments found in the farming industry.
Locomotive SPD Oils is a premium grade, heavy-duty, crankcase oil, intended mainly for railroad diesel engines. They do not contain zinc and therefore can be used in EMD engines fitted with silver piston-pin bearings. They are also designed for engines subjected to the most severe operating conditions, especially where fuel sulphur is high and where long oil drain intervals are required.
Samin SPD gear oils are designed for use in automotive and heavy duty equipment transmission and differential under moderate operation condition where an EP (extreme pressure) lubricant is not required and where API Service Designation GL-1 gear oil is specifically called for by the equipment manufacturer.
SAMIN SPD high quality, multipurpose, extreme pressure gear oil lubricants are suitable for today's demanding automotive and industrial applications. SAMIN SPD Gear Oils protect heavily loaded and highly stressed gear sets against wear, scuffing and scoring. Wide range of operating temperatures, rust and corrosion protection and protection against excessive foaming are additional features of the SAMIN SPD lubricants.
SEPAHAN ATF-3 is semi-synthetic, high performance automatic transmission fluid exceeding the latest revised specifications of Ford Mercon and General Motors, Dexron III Specifications. Sepahan ATF-3 is recommended for most passenger car and commercial automatic transmissions. It is also suitable for power steering systems, hydraulic applications and some manual transmissions where an automatic transmission fluid is specified.
Sepahan Parmis is a semi-synthetic “universal tractor transmission oil” (UTTO) designed for use in transmissions, hydraulic systems, oil immersed brakes and other ancillary systems fitted to agricultural tractors and off-road equipment. Sepahan Parmis is recognized by leading agricultural equipment manufacturers and suitable for use in most modern equipment.
Sepahan Z1-S is a high performance, multi-purpose water soluble, semi-synthetic cutting fluids. It is formulated from high quality base oils, emulsifiers and additives to provide effective machining performance in a wide variety of operations. It is designed for a range of light to moderate duty cutting operations to moderate to heavy duty machining on ferrous and non-ferrous metals.
Sepahan ZS-1 Oil is a fully biostable synthetic metalworking fluid, formulated from high quality base oils and additives to provide effective machining performance in a wide variety of operations. The recommended concentration for use in medium water hardness is between 3 to 10%, depends on the severity of the operation involved.
Sepahan Trans Oils are electrical insulating fluids, for use in electrical systems where rapid heat transmission and high oxidation stability are required. They offer good dielectric strength and excellent low temperature properties without the use of pour point depressants. They are manufactured from specially refined naphthenic feedstock for class II and paraffinic feedstock for class I and free of polychlorinated by phenyls (PCB).
Sepahan Turbine Oils are superior performance turbine oils designed for use in steam turbines, gas turbines and combined cycle gas turbine (CCGT) applications under the most severe operating conditions. These progressive products are based on high quality basestocks along with specially chosen additives engineered to provide the deposit control and keep-clean performance required by severe duty gas turbines as well as excellent water separability needed for steam turbine operation.
Sepahan Hararat oils are high performance products intended for use in closed indirect heating installations. They are formulated from highly refined base stocks that are resistant to thermal cracking and chemical oxidation. They have good heat transfer efficiency and their viscosities are such that they can be pumped readily at both start-up and operating temperatures.
Sepahan Hararat GT oil is a high performance product intended for using closed indirect heating installations. It is fully synthetic, supreme performance lubricant which is resistant to thermal cracking and chemical oxidation. It has good heat transfer efficiency. The flash point of this oil will not decrease significantly in service because of its resistance to thermal cracking at the operating temperatures for which recommended.
Sepahan rubber 22 is low-Viscosity paraffinic process oil with a very light color and good light stability. Its low Viscosity aids in rapid ingredient dispersion during mixing operations and its color stability makes it ideal for use in white or light colored compounds. It gives improved resiliency, good extrudability, reduced heat buildup, and better temperature flexibility. It is particularly recommended for use in manufacturing Butyl rubber.
Sepahan flushing is a mineral oil-based product for flushing / cleaning the internal components of equipment and machinery. It is suitable for Flushing circulation systems, gearboxes and other equipment to remove rust preventatives, dirt, construction debris and water prior to service or in older equipment which simply require cleaning.
Sepahan Hydraulic Oils are constructed from selected base oils and a proprietary additive system to provide well balanced performance that can be used for avariety of applications in a range of applications. The products exhibit exceptional oxidation and thermal stability allowing long oil life and minimized deposit formation in hydraulic systems. Their controlled demulsibility permits the oils to work well in systems contaminated with small amounts of water yet readily separate large amounts of water
Sepahan Navard oils are extra high performance heavy duty circulating oils formulated from high quality base stocks and a proprietary additive system to provide satisfactory Viscosity/temperature characteristics, low foaming tendencies and excellent water separation properties. In addition, they contain proven additives to protect equipment against corrosion and the lubricant against oxidation, which results in long service life. They are available in five ISO Viscosity grades, ranging from 100 to 460 cSt at 40 °C.
Sepahan Hydraulic 10W is a high performance hydraulic oil formulated from advanced base oils and a balanced additive system designed to satisfy a wide range of heavy-duty hydraulic equipment requirements. This product is specifically engineered using an effective balance of ashless dispersants and metallic detergents combined with inhibitors to control oxidation, wear, corrosion and rust.
Sepahan Hydraulic 10W is used in a wide range of on and off-highway hydraulic applications.
Sepahan Hydraulic T Oils are supreme performance anti-wear hydraulic oils engineered for applications subject to a wide range of temperatures or where small the variations in Viscosity with temperature are required. They are formulated with high quality base oils and a carefully balanced super-stabilized additive system that helps to neutralize the formation of corrosive materials provides maximized anti-wear protection for high pressure vane, piston and gear pumps.
Sepahan Hydraulic ZF Oils are high performance anti-wear hydraulic oils specifically designed to meet the needs of modern, high pressure, industrial and mobile equipment hydraulic systems. Based on advanced zinc and chlorine free technology, Sepahan Hydraulic ZF Oils are formulated to ensure exceptional performance in hydraulic fluid power transmission systems subjected to severe duty.
Sepahan Poulad PG lubricants are supreme performance gear and bearing oils designed to provide outstanding benefits in terms of efficiency, long oil life, and equipment protection. These fully synthetic, Polyalkylene glycol (PAG) lubricants were developed for use under operating conditions beyond the capabilities of mineral oils. Their low pour points ensure excellent low-temperature fluidity.
"Sepahan Hydraulic Special" Oils are premium quality, solvent refined high VI mineral oil based fluids generally designed to satisfy a wide range of hydraulic equipment requirements. These products meet the most rigorous performance requirement of a wide range of hydraulic system and component manufacturers using various multi-metallurgy designs allowing a single product with outstanding performance characteristics.
SepGear Oils are high quality, extreme-pressure oils designed for the lubrication of heavy-duty industrial gear. Their high load carrying capacity and anti-friction characteristics are coming to offer exceptional performance in gears and other industrial applications. SepGear Oils protect against corrosion and rusting. They have excellent water separating properties and they are strongly resistant to foaming in service.
Sepahan Compressor Oil is a premium quality lubricant developed for the lubrication of rotary sliding vane and screw air compressors. It is based on refined base oils and carefully chosen additives. They incorporate novel additive technology to give outstanding antirust and ant oxidation performance.
Sepahan Quench oils are highly refined mineral oil blended with additives to impart rapid cooling, excellent oxidation stability and extended service life. This product permits uniform hardening of steels with minimum distortion and discoloration, while helping improve grain structure and promote long service life.
Grease Lithium SPD products are high performance greases. They are multipurpose industrial greases. These lithium greases are formulated to provide extra protection against rusting and water washout. Grease Lithium SPD greases are recommended for most types of industrial applications including heavy bearings and electric motors.
Grease Lithium SPD EP products are high performance greases. They are multipurpose, extreme-pressure industrial greases based on a blend of highViscosity indexmineral oils and contain extreme-pressure and other proven additives. Grease Lithium SPD EP 00, 0, 1, 2 and 3 greases are recommended for most types of industrial applications including heavy-duty applications where high unit pressures or shock loads are present. The recommended operating temperature range is from -30ºC to 125ºC.